NAME
    _wingpio - GPIO functionality of a Windows 10 IoT Core device

FUNCTIONS
    add_event_callback(...)
        Add a callback for an event already defined using add_event_detect()
        channel = A pin number.
        callback = A callback function to be added.
    
    add_event_detect(...)
        Enable edge detection events for a particular GPIO channel.
        channel = A pin number.
        edge = RISING, FALLING or BOTH
        [callback] = A callback function for the event (optional)
        [bouncetime] = Switch bounce timeout in ms for callback
    
    cleanup(...)
        cleanup(channel=None)
        
        Resets GPIO channels specified or all if none specified
        
        channel=A single channel or list of channels to cleanup
    
    event_detected(...)
        Returns True if an edge has occured on a given GPIO.  You need to enable edge detection using add_event_detect() first.
        channel = A pin number.
    
    input(...)
        input(channel) -> HIGH/LOW
        
        Gets the current state of the GPIO pin specified
        
        channel=A single pin number
    
    output(...)
        output(channels, values)
        
        Outputs to GPIO pins the corresponding values specified
        
        channels - A single channel or list of channel pins
        
        values - HIGH or LOW for every corresponding channel
    
    remove_event_detect(...)
        Remove edge detection for a particular GPIO channel
        channel = A pin number.
    
    setup(...)
        setup(channel(s), direction, pull_up_down=PUD_OFF, initial=None)
        
        Setup a GPIO channel or multiple GPIO channels for use.
        channel(s) is a single channel pin number or list of channel
        pins to setup.
        
        direction is either IN or OUT depending on how the pins are used
        
        pull_up_down is either PUD_OFF, PUD_UP or PUD_DOWN.
        
        initial is an initial value (HIGH or LOW) for the pin after setup

DATA
    BOTH = 3
    FALLING = 2
    HIGH = 1
    IN = 1
    LOW = 0
    OUT = 0
    PUD_DOWN = 1
    PUD_OFF = 0
    PUD_UP = 2
    RISING = 1
    pincount = <dependent on device>

FILE
    _wingpio_d.pyd

